-
$240.00
Heavy-duty underbody mounting plate for AM General HMMWV M1165 armored Humvee vehicles.
This structural bracket mounts under the chassis and provides secure attachment points for armor components and structural assemblies.
Compatible with late-model M1165 and similar HMMWV variants.
Key Details
• Part Name: Underbody Mounting Plate
• Part Number: 4668359
• Vehicle: AM General HMMWV M1165 Humvee
• Type: Structural chassis mounting bracket
• Installation: Underbody / frame mounted
-
$200.00
Original HMMWV engine wiring harness for Detroit Diesel 6.5L naturally aspirated engines used in A2-series Humvee vehicles.
Part Number 12446828 (NSN 6150-01-412-3192). This military-spec harness distributes electrical power and signals between the vehicle electrical system and engine components including the starter, alternator, sensors, and glow plug system.
Features a military circular bulkhead connector, braided protective loom, and multiple engine component branches designed for harsh operating environments.
Commonly used on M1025A2, M1035A2, M1043A2, M1045A2, M1097A2, and M997A2 HMMWV vehicles.
-
$600.00
Original GM 3L80 (TH400) automatic transmission used in early AM General HMMWV / Humvee vehicles equipped with the 6.2L Detroit Diesel engine.
This heavy-duty 3-speed hydraulic transmission is known for its durability and was widely used in military Humvees from the mid-1980s through the mid-1990s.
Part Details
• Transmission Model: GM 3L80 / TH400
• Part Number: 12339146
• CAGE Code: 67101
• Type: 3-Speed Automatic Transmission
• Control: Hydraulic / Mechanical (no electronics)
Compatible with several early HMMWV military vehicle platforms.
-
$540.00
Pair of ballistic armor mounting brackets for armored HMMWV vehicles equipped with B-Kit armor systems.
This set includes both Right-Hand and Left-Hand brackets used to mount the side ballistic armor panels to the vehicle frame.
Compatible with HMMWV M1151, M1152 and M1165 armored variants.
Included in this listing
• 6452284R – Right Side Ballistic Armor Mounting Bracket
• 6452283L – Left Side Ballistic Armor Mounting Bracket
These brackets form part of the B-Kit armor mounting structure used on armored Humvee vehicles.
-
$290.00
Ballistic armor mounting rails and support brackets used on armored HMMWV vehicles equipped with B-Kit armor systems.
These structural components are designed to secure ballistic armor panels to the vehicle frame, providing reinforced mounting points for armored Humvee configurations.
Compatible with M1151, M1152, and M1165 HMMWV variants.
Key Details
• Part Numbers: 12469405 / 12469406 / 12469407 / 12469408
• Component Type: Ballistic Armor Mounting Rail / Support Bracket
• Vehicle Platform: HMMWV / Humvee
• Compatible Models: M1151, M1152, M1165
• Armor System: B-Kit armored configurations
-
$240.00
Ballistic armor mounting support plate for armored HMMWV vehicles equipped with B-Kit armor systems.
This structural plate bolts to the vehicle body side structure and provides reinforced mounting points for side ballistic armor panels and the armor rail system.
Compatible with AM General HMMWV M1151, M1152, and M1165 armored variants.
Key Details
• Part Number: 6452285
• Component: Ballistic Armor Mounting Support Plate
• Vehicle Platform: HMMWV / Humvee
• Compatible Models: M1151 / M1152 / M1165
• Armor System: B-Kit
-
$240.00
Right-hand ballistic armor support plate for armored HMMWV vehicles equipped with B-Kit armor systems.
This reinforced steel plate mounts to the vehicle body side or rear wheelhouse structure and provides structural support and mounting points for side ballistic armor panels and armor rail brackets.
Compatible with AM General HMMWV M1151, M1152 and M1165 armored variants.
Key Details
• Part Number: 6432287R
• Side: Right Hand (RH)
• Component Type: Ballistic Armor Support Plate
• Vehicle Platform: HMMWV / Humvee
• Armor System: B-Kit Armor
-
$90.00
Original HMMWV instrument panel housing / dashboard frame assembly used on armored Humvee platforms including M1114, M1151 and M1165.
This steel dashboard structure mounts the instrument cluster, ignition switch, indicator lights, hand throttle, and switch panels.
Finished in military CARC green coating and designed to bolt directly to the vehicle firewall and dash cross-brace.
-
$33.00
Original HMMWV jerry can holder bracket designed to mount and secure a standard 5-gallon NATO fuel or water can on a Humvee.
The curved vertical supports cradle the sides of the can while the mounting bars secure the bracket to the vehicle structure.
Heavy-duty steel construction designed for military vehicle use.
-
$90.00
Original HMMWV driver-side engine compartment splash shield used to protect engine bay components from mud, debris, and heat.
This molded military panel mounts along the driver-side frame rail and inner fender, helping shield wiring, hoses, and drivetrain components while directing airflow through the engine compartment.
Includes internal heat shield plates designed to protect the plastic panel from exhaust and turbo heat.
-
$1,800.00
Complete military auxiliary air-conditioning system removed from an armored HMMWV M1165.
This kit includes the major HVAC components used to cool the crew compartment of up-armored Humvees, including the evaporator unit, dual condenser assemblies with electric fans, compressor, blower assembly, air ducting panels, and mounting hardware.
Designed for armored Humvee vehicles operating in extreme heat environments.
-
$200.00
Original driver-side rocker / lower body cover panel removed from an HMMWV M1165 armored Humvee.
This stamped steel panel mounts along the lower side of the vehicle under the doors, between the front and rear wheel wells, covering the rocker area and protecting body seams, wiring, and mounting points.
Finished in military CARC coating and designed for Humvee body installations.
-
$199.00
Original pair of Wheelhouse Stowage/Mounting Plates for the HMMWV M1165. These heavy-duty plates install over the rear fender arches in the cargo bed, providing a secure base for radio gear, storage brackets, and mission-specific equipment.
-
$170.00
Original HMMWV radio mounting base with shock isolation system, used in military communication-configured Humvee vehicles.
This heavy-duty tray supports SINCGARS radio mounts, VRC-series radios, intercom units, and communication electronics inside the vehicle radio rack assembly.
Designed to withstand vehicle vibration, shock, and off-road operation.
-
$275.00
Original HMMWV transmission control / shifter assembly designed for vehicles equipped with the GM 3L80 3-speed automatic transmission.
This mechanical PRND21 gate-style shifter includes the shift linkage arms, wiring connectors for safety switches, and the dash mounting bracket.
Compatible with several AM General HMMWV models including M998, M1025, M1038 and M1097.
Key Details
• Part Number: 5741561
• NSN: 2520-01-188-5464
• Transmission: GM 3L80 Automatic (3-Speed)
• Type: Mechanical transmission control / shifter assembly
• Vehicle Platform: AM General HMMWV / Humvee
INCLUDED Reverse Back Up Light Swith Kit For HMMWV, HUMMER 12338435
-
$700.00
Original military Transmission Control Module (TCM) assembly used to electronically manage automatic transmissions in heavy military vehicles.
This ruggedized module controls gear shifting, torque converter lockup, hydraulic pressure regulation, and transmission diagnostics.
Built with a sealed aluminum housing and CARC military coating, designed for operation in harsh environments including vibration, dust, and moisture.
